AWEA MVP7040
- 5 FACE BRIDGE Mill MACHINING CENTER
- 275’’ x-axis, 157’’ y-axis (allows 19.5’’ each side of table for angle head with tooling)
- 137’’ distance between columns
- 275’’ x 118’’ Table Size
- 44,000# Table Loading
- 49’’ spindle travel, 55’’ w-axis (Cross rail Up & Down)
- 90-degree angular head with auto 5 degree indexing
- Universal head (auto 5 degree C axis & manual 5 degree A axis)
- Auto head storage
- 60ATC (Vertical/Horizontal ATC system)
- 4,000rpm Spindle Speed (gearbox type)
QuickMill Gantry Machining Center with Pipe Rotation Fixture
- 36’’ Z axis, 60’’Y axis, 324’’ X axis
- 750 KG Full 4th rotary axis repositionable to 75’ in X
- 6000 RPM
- Perfect for slotting and machining pipe, tube or bar up to 75’ long with repositioning
- Angle Head
- New ways, drives and Fanuc controls 9/20/18
KOMO BUTLER VERTICAL MILLING CENTER
- 36’’ Z axis, 24’’ Y axis, 240’’ X axis
- Full 4th rotary axis repositionable to 50’ in X
- 10,000 RPM
- Perfect for slotting and machining pipe, tube or bar up to 50’ long with repositioning
Johnford Bridge Mill
- 161"x axis, 90.5"Y axis, 31.5"Z axis
- 6000 RPM
Toshiba CNC Horizontal Boring and Milling
- 98” X axis, 70” Y axis 57” Z axis
- Full 4th axis Rotary Table
- 3000 RPM
Feeler 2218 Bridge Mill (#1)
- 6000 RPM 85’’ X 71’’ Y
- CAT 50, 60 tool-changer
- 35 HP totally enclosed
- Renishaw probe
Feeler 2218 Bridge Mill (#2)
- 6000 RPM 85’’ X 71’’ Y
- CAT 50, 60 tool-changer
- 35 HP totally enclosed
- Renishaw probe
DAEWOO ACE-H100 CNC HORIZONTAL MACHINING CENTER
- 78.70" X axis, 49.70" Y axis, 49.70" Z axis travel
- Dual 39.4" x 39.4" pallets with auto pallet changer
- Spindle speeds to 4500 rpm
Kitamura Horizontal Machining Center
- 39.4” X axis, 31.5”” Y axis, 32.2”” Z axis
- 12,000 RPM Spindle Speed
- Dual Pallets with auto pallet changer
- Tombstones
HITACHI SEIKI VA-85, CNC Vertical Machining Center
- 124”” X-Axis, 33.5”” Y-Axis, 32”” Z-Axis
- 131.9”” x 33.5”” Working Surface of Table
- 6,600# Max. Table Load
- 4000 RPM Spindle Speed
DAH-LIH MVC-2100 vertical milling
- 82.7” X, 33.5” Y, 29.9” Z
- 6000 RMP
Wacheon ECOMIL-85 Vertical Milling
- 79” X axis, 34” Y axis, 30” Z axis
Hitachi Seiki VA85 vertical Machining Center
- 80” X axis, 33.5” Y axis, 32” Z axis
- 4000 RPM Spindle Speed
MORI SEIKI MV-55 Vertical Milling
- 41” X axis, 22” Y axis, 22” Z axis
MORI SEIKI NV 5000 High Speed Milling
- 32” X axis, 20” Y axis, 20” Z axis
- 2.6 Seconds Chip-to-Chip Tool Change
- 12,000 RPM
Okuma & Howa Act 3 CNC Lathe
- Distance Between Centers: 23.62”
- Maximum Turning Diameter: 8.26”
- Maximum Turning Length: 22.83”
